Premium Refrigeration Compressor: The compressor adopts r134a refrigerant, circulating cooling, environmental protection, and pollution-free. The temperature of the chiller can be controlled at 68℉-79℉ (20℃-26℃), allowing your plants to grow more luxuriantly and axolotl more freely. It also uses a corrosion-resistant pure titanium pump, which can achieve the best between fresh water and seawater. Built-In Fans for Fast Cooling: 2 cooling fans are designed to dissipate heat in time, increase the service life of the compressor and save electricity, and better take care of your chiller. In addition, there are a large number of cooling vents on the 2 sides of the chiller to speed up heat dissipation to keep the water in the fish tank always cool. So leave 6 inches of space around the chiller to ensure good air circulation. Low-Noise Cooling Work: The special noise-reduction design makes the compressor run very quietly, the low-noise operation will not affect your daily work and rest. And monitors the water temperature in real-time, when the water temperature is higher than the starting temperature, the chiller automatically runs to cool down. After power off and restarting, the chiller will continue to cool according to the original set temperature. Tolerance Setting: Every chiller has a tolerance value setting (F1) of 1-60. For example, I set the starting temperature to 79°F and the tolerance value to 2, then when the chiller detects that the temperature of the chiller’s water is 79°F, the chiller will automatically run and cool down until the water temperature is 77°F. Repeat cycle to cool down. Cooling Effect: The cooling temperature is affected by the ambient temperature and the size of the fish tank. For example, when the ambient temp is 89°F, the fish tank temperature is 86°F, and the fish tank ≤300L, the water cooler can cool down to between 71-75°F. If you want to drop below 68℉, the recommended water volume is below 200L.
Water Chiller Bullet Points: Large refrigeration capacity (recommended volume below 75 gallons) Ideal for keeping the nutrient solution in your reservoir at the perfect temperature Anti-corrosive pure titanium evaporator for both fresh and salt water Please note: The starting ambient temperature of your solution will always affect the duration of the initial chilling process Water Chiller Specifications: Rate of Flow: 1/3 HP Voltage: AC110V Rated frequency: 60 Hz Water Temperature: 68°F-78°F Refrigerant: R134a The Cooling Water: ＜300L Product Dimensions (L x W x H): 11.44 x 11.44 x 12.6 inches Weight: 32.5 pounds Manufacturer warranty: 3-year warranty
Reviews
There are no reviews yet.