Home, Garden &Tools

Remember when you weren’t bound by cords. Get your grind on with the WEN 20V Max Brushless Cordless Angle Grinder. Power through rust, chains, pipes and more. Clocking in at up to 8500 RPM, this grinder features a brushless motor for more runtime, better performance, and less maintenance than brushed alternatives. Our lightweight design weighs in at a mere 5 pounds to limit fatigue during long days on the grind. The lock-on power switch snaps into place to keep the machine running without constantly holding your thumb down on the trigger. This powerful grinder comes packed with accessories, a three-position auxiliary side handle, a spindle lock for easy accessory changes, and a 2-amp battery charger. And, because it’s a WEN product, your 4-1/2-Inch brushless angle grinder comes backed by a two-year warranty, a stocked inventory of replacement parts, and a friendly customer phone line, all to make sure you remember WEN.

Remember when you could support your big old workpieces. Take your drill press to the next level with the WEN Drill Press Table. Onboard rulers maximize accuracy for precise and even cuts while the adjustable fence slides back and forth to fit the needs of any project. The sturdy 1-inch thick MDF body prevents warping and wobbling during operation while the fence’s stop block adjusts along the fence to help center your workpiece. The removable insert allows users to drill completely through their workpiece without damaging the table. Including the WEN 8-Inch Drill Press (model 4208), the WEN 10-Inch Drill Press (models 4210 & 4212), the WEN 12-Inch Drill Press (model 4214), the WEN 15-Inch Drill Press (model 4225), and the WEN 17-Inch Drill Press (model 4227). Although this drill press was designed with WEN in mind, it’s universal fit allows for installation on the majority of drill presses on the market. Simply tighten the mounting clamps onto tables anywhere from 5 to 16 inches in width. And, because its a WEN product, your drill press table comes backed by a friendly customer help line and a two-year warranty, all to make sure you remember WEN.

Remember when you weren?t bound by a single height? The WEN 220-Pound Capacity Portable Work Bench and Vise allows users to go anywhere from 29 to 41 inches in height, giving you the versatility to meet the needs of any project. Simply push down on the quick-release foot pedal to allow the top of the work table to move freely up and down. With vertical stops every two inches as well as a beveling top with four positive stops, this reliable stand will provide any project the support it needs. Quick release grips allow for the top two portions of the table to quickly seperate, making it easy to extend the width of the table from 12 to 19 inches. Use the hand cranks to tightly grip workpieces up to 8 inches in width using the 8 sliding rubber clamp grips. The work surface features an onboard protractor and 22-inch ruler with both metric and imperial markings. The steel and aluminum body is designed to fold into itself, making for easy transportation and storage between jobs. And, because its a WEN product your height-adjustable work bench comes backed by a two-year warranty, a stocked inventory of replacement parts, and a friendly customer help line, all to make sure you remember WEN.

Remember when you could sit down? Sitting has been one of America’s most beloved pastimes, second only to laying. WEN celebrates this age old tradition with the WEN 300-pound capacity chrome-plated bar stool. The padded vinyl cushion measures in at 14-1/2 inches in diameter and 3-3/4 inches thick. It’s swiveling function rotates the cushion a full 360 degrees, allowing users to face over 360 directions. At a height of 29 inches, The WEN 300-pound capacity is at the perfect size for any countertop, whether it be at the garage or the wet bar. The chrome-plated body fights rust and corrosion while the single ring footrest helps alleviate the weight of your own legs. And because this is a WEN product, your bar stool comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN.

Remember when you kept the lights on? The WEN Power Station generates up to 600 surge watts and 300 rated watts of power, making it a safe and reliable backup power source for sporting events, camping, long road trips, and more. No engine means no noise, no fumes, and no maintenance. Keep the essentials powered up through blackouts – the 269-watt-hour lithium-ion battery can recharge smartphones up to 14 times, laptops up to 6 times, or tablets up to 7 times (based on the average power consumption of typical consumer devices). It can also power a 10W lightbulb for up to 24 hours, or a 45W car fridge for up to 6 hours. The onboard inverter provides quiet, clean energy, free of voltage spikes and drops. Designed to mirror a pure sine wave, this unit limits total harmonic distortion to under 3 percent at full load, making it safe to run laptops, cellphones, TVs, monitors, tablets, and other sensitive electronics. The fully-packed panel comes equipped with two three-prong 120V NEMA 5-15R receptacles, a quick-charge 12V 24W USB-A port, two standard 5V 12W USB-A ports, one 20V 60W USB-C port, one automotive-style 12V 10A DC socket, and two 12V DC barrel sockets. The detailed backlit display keeps you informed in real time about the battery charge level, the power station’s temperature, the wattage input and output, the status of each outlet, and more. The rubber-gripped carrying handle collapses to provide an even, stackable surface, while the onboard LED light helps illuminate your work area as needed. The light can also flash an “SOS” pattern in an emergency. This package includes a standard 65W wall charger. The station is also compatible with aftermarket quick chargers and solar panels. And because it’s a WEN product, your power station comes backed by a two-year limited warranty and a friendly customer help line, all to make sure you remember WEN.

Remember when you had four different tools all in one nailer? Go from a brad nailer to a stapler to a flooring gun all with the WEN 4-in-1 18-Gauge Pneumatic Flooring Nailer and Stapler. Drive 18-gauge brads anywhere from 5/8 to 2 inches in length or 1/4-inch narrow crown staples anywhere from 1/2 to 1-5/8 inches in length. Attach the adjustable spring loaded flooring head to angle your fasteners at a 45-degree angle, making this the perfect companion for carpenters that need versatility on the job. With an operating pressure of 60 to 100 PSI and a 1/4-inch NPT air inlet, simply hook up your favorite air compressor and start nailing. The onboard depth adjustment wheel controls how deep the fastener shoots into your workpiece while the quick-release nose makes it easy to clear jams in the middle of a big job. Our lightweight design along with the rubber-backed grip prevents fatigue during long jobs. Combine that with the 100-nail capacity magazine for a nail gun that makes easy work out of crown molding, tongue and groove flooring, trim work and more. This package includes a carrying case for storage and transportation, two hex keys and oil. And, because it’s a WEN product, your 4-in-1 18-Gauge Flooring Nailer comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN. Remember when you could take on the entire job with one single nailer? Remember WEN.

Remember when you could make fine-tune adjustments with the simple turn of a wheel. The WEN 4.25 in. Tilting Vise provides 90° of stable and reliable clamping action. Great for incremental drilling and precision work. With a locking cradle and positive work stops every 15° (0°, 15°, 30°, 45°, 60°, 75°, and 90°), this vise is the perfect companion for your benchtop, your drill press, your work table, and more. Made from Heavy-duty powder-coated cast iron, the WEN Tilting Vise grips tightly onto your work pieces, providing over 1900 lbs. of clamping force. The 4.25 in. x 1.75 in. jaws open up to 4.25 in. W. The fixed jaw features a V-shaped groove to hold round objects either vertically or horizontally while the removable handles help users easily install the vise into tight spaces. With six 1/2 in. mounting brackets positioned around the outside edge of the vises base, the WEN Angled Vise is compatible with the majority of drill press tables on the market, including the WEN 4210 and 4212 10 in. Drill Presses, the WEN 4214 12 in. Drill Press, the WEN 4225 15 in. Drill Press, and the WEN 4227 17 in. Drill Press. And because its a WEN product, your cross vise comes backed by a 2-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN.

Remember when you could make fine-tune adjustments with the simple turn of a wheel? The WEN 4.25-Inch Tilting Vise provides 90 degrees of stable and reliable clamping action. Great for incremental drilling and precision work. With a locking cradle and positive work stops every 15 degrees (0, 15, 30, 45, 60, 75, and 90 degrees), this vise is the perfect companion for your benchtop, your drill press, your work table, and more. Made from heavy duty powder-coated cast iron, the WEN Tilting Vise grips tightly onto your workpieces, providing over 1900 pounds of clamping force. The 4.25-by-1.75-inch jaws open up to 4.25 inches wide. The fixed jaw features a V-shaped groove to hold round objects either vertically or horizontally while the removable handles help users easily install the vise into tight spaces. With six 1/2-inch mounting brackets positioned around the outside edge of the vise?s base, the WEN Angled Vise is compatible with the majority of drill press tables on the market, including the WEN 4214 12-Inch Drill Press, the WEN 4225 15-Inch Drill Press, and the WEN 4227 17-Inch Drill Press. And because it?s a WEN product, your cross vise comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN.

Remember when you didn’t depend on cords and gasoline to run your tools? Power your life with a WEN 40V Max Lithium-Ion 4Ah Rechargeable Battery. Compatible with the WEN 40V Quick Charger (model 40400), this battery is designed to fit the entire WEN 40V line, including the WEN Leaf Blower and the WEN Chainsaw. Lithium-ion cells create a fade-free power supply that provides 4 amp hours worth of steady and consistent operation. An onboard battery meter informs users when their power supply is running low and in need of a charge. Replace your current battery or add an extra for double the work time, keeping one on the charger and one in the machine. Forget the hassles of extension cords and gasoline. It’s time to simplify your life with a WEN 40V Max Lithium-Ion 4Ah Rechargeable Battery. Remember when your yard work was easier than ever before? Remember WEN.