Shop

AUOSHI SECURITY SMART LOCK! Advanced Keyless Entry WiFi Smart Door Lock offers multiple convenient ways to unlock your door: 1. Fingerprint Recognition: Unlock your door with a simple touch. 2. Passcode Entry: Enter a secure PIN code for quick access. 3. IC Card Access: Swipe your card for effortless entry. 4. Remote Unlock via Mobile App: Control your lock remotely using the app. 5. Traditional Keys: As a backup, we provide traditional keys for your peace of mind. Specification Unlock type: Fingerprint, password, IC card, key, APP remote unlock Storage capacity: 100 fingerprints, 100 sets of passwords, and 100 sets of IC cards(Equipped with 2 pcs) Power supply: 4 AA batteries(not included) Voice: Human voice Low voltage alarm: ≤4.8V Antistatic: Exposure +/-8KV Air+/-15KV Standby current: <70uA Dynamic power consumption: <200mA Operating environment: -25℃/-13℉ ~+70℃/158℉ Operating humidity: 0%~95% Applicable door thickness: 35MM-55MM(1.38"~2.17") Power supply interface: USB Type-C DC 5V/1A Embrace a smarter, more convenient lifestyle. Multiple unlocking methods for home security, providing friendly and accessible options for children and the elderly. Installation Instructions 1. Install the lock body with the UP arrow pointing upwards and the lock tongue retracted. If it is not installed upwards according to the arrow, the installation is unsuccessful. 2. The default distance between the edge of the wooden door and the center hole of the lock body is 60mm. If the center distance is 70mm, you can rotate it upward and stretch out the excess part for installation. If the distance between the center hole and the wooden door is 70mm and no excess part is stretched out, the installation is unsuccessful. 3. Before installation, you need to adjust the angle of the lock core lever. You must keep it in a position where you can rotate 90° up and down to insert it into the lock body hole. If the angle is not right, after inserting it into the lock body hole, the lock tongue cannot be completely unlocked and locked abnormally. 4. After the front lock and lock core lever connection line are inserted into the door frame, turn the lock core lever 90° to check whether it is installed correctly. If the lock core lever does not rotate normally, please check the previous step. 5. The correct installation method for the hardware fixing plate of the rear lock is to fit the side with the silicone pad on the wooden door and fix it with screws. If the hardware fixing plate is installed upside down, the rear lock cannot be installed and fixed. 6. The connection wire and lock core lever of the front lock need to be correctly inserted into the lock body and door frame. If the lock core lever is inserted in the wrong direction and the lock is not opened or closed normally, please check the previous step. 7. After the rear lock is installed, use 2 short screws to fix and tighten it in the battery compartment. Use 1 long screw to fix and tighten it under the rear lock. If the screws are not tightened, the lock will shake or not unlock after long-term unlocking. 8. After the installation is completed, rotate the manual switch knob of the rear lock to test whether the switch and lock are normal. If the switch and lock are not normal, please carefully check the above steps. Reinstall. Key points: 1. When the door is unlocked by rotating the hand in the door, it will not lock automatically when closing the door. You need to press and hold the * button on the front lock panel to lock it. 2. When the door is unlocked by pressing the button in the door and any fingerprint, password, or card is entered on the door panel, it will automatically lock within 5 seconds. 3. The door lock opens to the right by default. If you need to adjust it to the left, wake up the panel digital buttons and enter *61#. The management password is set successfully. 4. If after installation, long press the * key for 5 seconds and the lock fails to lock and the lock alarms, the left-open and right-open settings are wrong.