Kreg KMA2685 Rip-Cut

Great projects start with high-quality cuts, and you can make those cutsxe2x80x94more easily than you ever imaginedxe2x80x94using your circular saw plus the Rip-Cutxe2x84xa2 Circular Saw Edge Guide. The Kregxc2xae Rip-Cutxe2x84xa2 turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cutxe2x84xa2, you can cut with the confidence you want and the precision you need. The Rip-Cutxe2x84xa2 easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cutxe2x84xa2 does this with a long edge guide that follows the straight edge of the sheet you are cutting. So, all you have to do is lock the saw in at the measurement you wantxe2x80x94up to 24″xe2x80x94using the built-in measuring scale, and then make your cut. With a built-in measuring scale, you donxe2x80x99t have to measure and mark each cut, either. Just lock the saw sled at your desired cut width, and you’re all set, whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cutxe2x84xa2 makes it easier to cut down large sheets by yourself. The Rip-Cutxe2x84xa2 is very easy to use. Simply mount your saw to the universal sledxe2x80x94it accepts most left-blade or right-blade sawsxe2x80x94and then slide the sled onto the aluminum rail. After a simple one-time calibration, you can lock in your cut width (up to 24″) using the measuring scale and precision cursor. Then, just hold the edge guide against the edge of your sheet as you guide the saw. Youxe2x80x99ll get straight, accurate, repeatable cuts easily every time.

Kreg KMA2685 Rip-Cut