BETTER BUILT 29510402

Description

Specifications

• Tool box & organizer type: Tool Boxes
• Material: Plastic
• Features: Portable
• Assembled product height: 10.000 in
• Max load: 16 oz
• Brand: Better Built
• Rec location: Vehicle
• Accessories: Easy assembly instructions
• Weight: 2 oz
• Color: Black
• Compatibility: most fullsize, midsize, and import trucks
• Pieces: 1
• Model: 2948815

Directions

• Instructions: . Mounting Instructions. 1. Attach the included adhesive foam pads to the upper part of each Grip Rite® half. 2. Holding the two Grip Rite® halves together, partially thread the 5/16″ bolt through the center hole, then set aside. Repeat for second pair of Grip Rite® halves. 3. Using a tape measure to place each Grip Rite® in a location approximately 20″ (26″ for wider boxes) from the front of the truck bed, that will align under the tool box “wings”. Loosely attach the Grip Rites® to the truck bed rails. Do not tighten. 4. Set tool box in position over the Grip Rites® on the truck bed rails. Make certain that the open lid will not strike the cab. Align the box to be square with the truck bed. 5. For toolboxes without pre-punched mounting slots, see steps 6 and 7. For most Better Built® brand toolboxes, skip to step 8. (Excludes Slide Mount and Top Mount boxes). 6. Mark Grip Rite® mounting hole locations on the bottom of the tool box with a felt tip pen. By adjusting the Grip Rite® location on the truck bed rail, it can be aligned with the locations marked. 7. Remove the tool box and drill 3/8″ hole in the marked positions through the box only. 8. Tighten the Grip Rites® to the truck bed rails. Do Not Overtighten, see torque specs below. Place tool box in position and align drilled holes or mounting slots with Grip Rite® mounting holes. 9. Insert hex head screw through fender washer and tool box, into the Grip Rite® body. Tighten with included hex wrench. Most tool boxes can utilize the Grip Rite® mounting system. You must measure the offset locations carefully and drill the 3/8″ mounting holes 3 3/8″ apart. Better Built® includes specific installation instructions with the different styles of truck boxes it manufactures. Note: Over the rail bed liners will require cutting a 4 1/2″ x 3″ hole to accommodate Grip Rite® mounts. Optimal torque: 10 lbs.