SereneDrains Recessed Ceramic Toilet Paper Holder Wall Mount Niche Bathroom Tissue Roll

SereneDrains Recessed Ceramic Recessed Toilet Paper Holder ** Important Note: This holder is designed to fit small and standard toilet paper rolls. However, since roll sizes may vary by brand, we recommend checking your specific roll before installation. ** Important Note: Dimensions are approximate and may vary slightly from item to item Color: White Glossy Dimensions Front: 6.5″x6.5″ Back Insert: 5.5″x5.5″ Side Projection: 3.75″ The toilet paper holder is made of Premium ceramic materials. The bathroom toilet paper holder is ready for installation, with no need to waterproof. For cleaning of the recessed toilet tissue holder use only all purpose cleaners. The toilet paper holder in wall is perfect for compact bathrooms and a sleek, built-in look. Easy Installation – complete the installation of your Ceramic toilet paper holder with a few easy steps. Installation Instructions Step 1: Select Location Choose a convenient and accessible spot on the wall. Ensure there are no pipes, electrical wires, or studs behind the chosen location. Mark the position with a pencil, using a level to keep it straight. Step 2: Cut the Opening Measure the recessed portion of the accessory (the part that fits into the wall). Transfer those dimensions to the wall, adding about 1/8 in. clearance. Carefully cut the opening using a tile saw for tiled walls, or a drywall saw for non-tiled surfaces. Step 3: Prepare the Surface Clean any dust or debris from the cut opening. Test-fit the accessory to make sure it sits flush with the wall. Adjust the opening if needed. Step 4: Insert the Accessory Press the accessory firmly into the opening until it sits flush with the wall surface. Use a level to ensure it is straight and properly aligned. Step 5: Seal with Silicone Run a clean bead of silicone sealant around all outside edges of the accessory where it meets the tile or wall. Smooth the silicone with a damp finger or finishing tool for a neat appearance. Allow silicone to cure fully before use. Step 6: Final Check Confirm the accessory is secure and level. Clean the surface with a soft cloth.